Dryer vent cleaning
Whole-home duct cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Fast, Reliable Dryer Vent Cleaning Across Long Beach
Dryer vent cleaning in Long Beach typically costs $160 to $280 for a single-family home, and most jobs take about an hour from setup to camera verification. The ocean air here changes the math on what a vent needs. Salt and moisture settle inside the pipe, mix with lint, and harden into a paste that a standard vacuum pass won’t remove. If your dryer takes two cycles to dry a load, or the laundry room smells musty when the machine runs, the vent is telling you something. Call (516) 559-4917 and we’ll give you a written price before any work starts.
We work in Long Beach every week, from the West End to the Canals to the President Streets. Our crews know what a salt-crusted vent looks like, what post-Sandy rerouting does to airflow, and why a beach-block home needs a different inspection than a house in Baldwin. This page explains what we do, what it costs, and how we determine whether a vent can be cleaned or has to be replaced.
Key Takeaways
- Dryer vent cleaning in Long Beach runs $160 – $280 for most single-family homes; multi-family and long runs cost more.
- Salt-air corrosion and post-flood lint compaction are the two biggest vent problems on the barrier island.
- Every job gets a written price before we start. It does not move at the door.
- All work is backed by our 365-Day Done Right Promise. If it fails within a year, we come back at no charge.
- We document vent condition with camera inspection, which matters if you’re filing an insurance claim after a storm.
Styles & brands we work with
Why Hollis Air Duct Hempstead Is Long Beach’s Preferred Dryer Vent Cleaning Company
Long Beach homeowners call us because we show up when we said we would, price the job before we touch it, and leave the site clean. That’s the Garrison Standard, and it applies to every vent we service on this island. Phones are answered by a live person, 24 hours a day, seven days a week. No voicemail loops.
Roy Castellanos leads our team, and he’s built the operation around a simple idea: the customer should know exactly what the job costs before the work starts, and know exactly what happens if the work doesn’t hold up. That’s why every job carries the 365-Day Done Right Promise in writing. If a vent we cleaned re-clogs or a repair fails within a year, we return and make it right at no charge. That includes a free second visit. Not negotiated. Written down.
Our technicians are background-checked and uniformed. You’ll know who’s walking into your home before they arrive. We run professional-grade equipment from Rotobrush and Nikro, including negative-air machines that capture dust and lint instead of blowing it into your laundry room. For homes with a lot of post-storm debris in the vent run, that equipment makes the difference between a surface cleaning and an actual fix.
Dryer Vent Installation in Long Beach
Dryer Vent Installation in Long Beach means running a new vent line from the dryer to the exterior of the house, and on this island that usually involves working around elevated foundations, tight crawlspaces, or older bungalow layouts that were never designed for modern dryer airflow. A full installation in Long Beach generally runs $350 to $650, depending on the run length, whether we’re using rigid galvanized pipe, and whether the termination needs to be relocated to meet code or avoid a deck that was added after the house was raised. We give a written price before any work begins, and that price doesn’t change once the technician is inside.
Rigid Galvanized Pipe Install
Galvanized steel pipe is the right material for Long Beach because it resists the salt corrosion that eats through foil flex pipe in a couple of seasons. We install rigid pipe in runs where building code requires it, and we slope the run so any condensation drains to the exterior rather than pooling inside. Every installation ends with a camera inspection so you can see the full pathway is clear.
Vent Rerouting for Elevated Homes
Many Long Beach homes were raised after Hurricane Sandy, and the dryer vent didn’t always get rerouted correctly. We’ve seen vents that terminate under a new porch, kinked flex pipe stuffed into a floor joist, and runs that sag in the middle and collect water. Our Dryer Vent Cleaning team checks termination clearance and airflow on every installation and rerouting job, because a buried or kinked vent can still trap lint and overheat the dryer even after the pipe is replaced.
Dryer Vent Repair in Long Beach
Dryer Vent Repair in Long Beach usually means one of three things: replacing a corroded section of pipe, reconnecting a joint that separated inside a wall or crawlspace, or fixing a crushed vent that’s restricting airflow. Repair costs in Long Beach typically run $180 to $350, depending on how much pipe needs replacing and how accessible the damaged section is. If you’ve had flooding, if the dryer has been tripping its thermal fuse, or if you can smell humid, musty air near the laundry room, the vent is likely the cause. We’ll diagnose it, show you what we found on camera, and quote the repair in writing before we start.
Post-Flood Pipe Replacement
After a flood or a bad nor’easter, homeowners sometimes reuse the old vent sections and assume they’re fine once the area dries out. We find pinhole leaks in galvanized pipe that’s been sitting in saltwater, and disconnects that dump humid air into wall cavities. That feeds mold that a standard cleaning can’t fix. The repair is straightforward: we replace the corroded sections, seal the joints, and reattach the line to a proper termination hood.
Crushed Vent Repair
When a house is elevated, the vent run often gets bent sharply or crushed against a new beam. The dryer still runs, but it’s working against a restricted airway. That’s a fire hazard and a common cause of thermal fuse failures. We locate the crushed section, cut it out, and install a proper elbow or replacement pipe with a clean, downhill slope to the outside.
Trusted Brands We Service in Long Beach
We service and install dryer vents on every major appliance brand in Long Beach homes, including LG, Samsung, Whirlpool, Maytag, GE, and Electrolux. We stock the standard rigid pipe sections, elbows, clamps, and termination hoods in our vehicles, so most repairs and installations are completed the same day. The equipment we use on your vent, including Nikro negative-air machines and Rotobrush agitation tools, is the same gear commercial crews run. You get the same standard of work on a single-family bungalow in the West End as you would on a larger building near the LIRR station.
See the difference
Before
After
Before
After
Before
AfterCommon Dryer Vent Cleaning Problems We See in Long Beach Homes
- Salt-crusted vent interiors. Ocean air carries fine salt particles into the vent, where they bind with lint and form a hard crust on the pipe walls. This crust narrows the airway and traps moisture. Standard vacuum cleaning won’t remove it; it takes agitation tools and negative pressure.
- Compacted damp lint after flooding. Homes that took on water during Sandy or a nor’easter often have lint that was wet, dried, and glued itself to the pipe. A cleaning that only reaches the first few feet of the run will leave this blocking material in place, and the vent re-clogs within weeks.
- Vent termination buried or blocked after house elevation. When a Long Beach house was raised, the old exterior vent hood sometimes ended up under a deck, close to the ground, or pointed into a crawlspace opening. Lint builds up at the termination point and the dryer runs hot.
- Musty odor that returns after another company cleaned the vent. This is usually a sign that the vent run was cleaned but not inspected. If the pipe has a pinhole leak or a disconnected joint, humid air from inside the house or crawlspace keeps re-wetting the lint. Camera inspection shows exactly where the problem is.
Pricing for Dryer Vent Cleaning in Long Beach, NY
A standard dryer vent cleaning for a single-family home in Long Beach runs $160 to $280. If the vent run is longer than about 20 feet, or if it passes through a tight crawlspace that’s hard to access, the price can reach $320. Multi-family buildings and condos with shared vent stacks cost more to service because the runs are longer and may require roof access. Repairs like replacing a corroded section of pipe run $180 to $350, and a full installation with rigid galvanized pipe runs $350 to $650. We give one flat price per job in writing before any work starts. Call (516) 559-4917 for a free estimate. We’ll tell you what the job costs, and that number won’t change when we arrive.
We Also Serve Cities Near Long Beach
Our crews work across the South Shore, so if you’re in Long Beach or nearby, we can usually reach you the same week you call. Dryer Vent Cleaning service extends to Oceanside, Baldwin, Rockville Centre, and Merrick. If you’re unsure whether you’re in our service area, call (516) 559-4917 and a live person will tell you.
Serving Long Beach, NY - Our Local Coverage Area
We’re based in the Long Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Dryer Vent Cleaning in Long Beach
If saltwater reached your dryer vent, you’ll typically see white salt crystals or rust-colored crust on the inside of the pipe, and the vent will have a persistent damp or musty smell. Saltwater corrodes galvanized pipe from the inside out, which creates pinhole leaks and weak joints. Not every salt-damaged vent must be replaced. If the pipe is structurally sound, we can clean out the salt and debris and restore airflow. But if corrosion has eaten through the metal or caused a joint to separate, the section has to be replaced, not patched. We document whatever we find with camera inspection so you can see it, and so you have evidence for an insurance claim if the damage is storm-related. Call (516) 559-4917 for an inspection.
No honest company can guarantee a vent won’t clog again in Long Beach, because the conditions here work against you year-round. Salt air, high humidity, and fine sandy dust make vents on this island clog faster than vents in mainland towns. What we do guarantee is the quality of the work, in writing, for a full year. Our 365-Day Done Right Promise means if the vent we cleaned clogs again within 12 months, we come back and clean it again at no charge. Most Long Beach households should plan on a dryer vent cleaning every 12 to 18 months, and more often if the dryer is used daily for a family with kids.
Not necessarily. The vent run itself may look dry from the outside while the inside walls are caked with dried salt, sand, and lint that got wet and then baked onto the pipe surface. That material narrows the airway, holds moisture, and creates a fire hazard. Even if the basement was dried out professionally, the vent needs to be inspected internally with a camera. If we find compacted debris, we’ll remove it with agitation and negative pressure. If we find corrosion or separated joints, we’ll show you and quote the repair in writing. Don’t wait for the dryer to trip a thermal fuse or for a musty smell to get worse. Call (516) 559-4917 and we’ll inspect it.
A musty odor that returns after a cleaning almost always means one of two things: either the previous crew only cleaned the first few feet of the vent and left compacted damp lint deeper in the run, or there’s a leak in the pipe that’s pulling humid air from the crawlspace or wall cavity back into the airflow. On a beach-block street in the West End, our tech found a dryer vent that had been rerouted through a crawlspace after Sandy. The galvanized pipe was crusted with salt crystals and packed with damp lint, causing the dryer to overheat and trip its thermal fuse. We used negative pressure and agitation tools to clear the lint pathway, then camera inspection confirmed no remaining blockage before we repaired the crushed section and reinstalled a proper termination hood. That’s the difference between cleaning a vent and actually fixing it. Call us and we’ll find the source of the odor.
It is a problem. A vent termination under a deck or close to the ground pulls in moisture, dust, and even insects from the soil below. It also traps lint because the flap can’t open fully if the clearances are wrong. That’s a fire risk. Long Beach building code requires minimum clearance between the vent termination and the ground, and a vent hood that ends too low after a house was raised often needs to be relocated. We can reroute the vent to terminate in a compliant location and install a proper hood with a bird guard. The job usually runs $180 to $350 depending on the changes needed. Call (516) 559-4917 and we’ll quote it in writing.
Written by Roy Castellanos, Owner at Hollis Air Duct Hempstead. Serving Long Beach, NY with dryer vent cleaning, repair, and installation backed by the 365-Day Done Right Promise.